| All horizontal surfaces on deck have a diamond pattern non-skid as shown in deck plan. Standard non-skid to be a contrasting color to parameter deck |
| |
| Chocks for mooring lines: |
| * Transom: stainless steel with attached cleat - recessed x 1 |
| * Transom sides: stainless steel with attached cleat - recessed x 2 |
| * Amidships: stainless steel with attached cleat - recessed x 2 |
| * Bow: stainless steel with attached cleat x 2 |
| * 1 x 12" (30.5cm) stainless steel cleat at bow |
| |
| Lower and upper rubrails FRP with a stainless steel cap - rub rails integral to hull |
| |
| Oval 16" (40.6cm) x 7" (17.8cm) stainless steel ports in hull as shown on design with tempered glass - all hull ports to include stainless steel deadlights - seven in hull - one in galley |
| |
| Stainless steel double bow roller to accommodate a 110 Bruce or 105 CQR anchor on starboard roller and the port roller to be designed for a second light anchor or for mooring lines. Roller on starboard side to be slotted for chain and the port roller to be smooth for line - roller to be built per PAE design |
| |
| Stainless steel stanchions around foredeck to be 1 1/4" (3.2cm) diameter. Pulpit to be 1 1/4"(3.2cm) diameter |
| |
| A Maxwell 24 volt VWC 3500 windlass to be mounted on a molded FRP base |
| |
| Foredeck hatches to be Lewmar #Ocean 70 x 1 and #Ocean 40 x 2. One (1) with Lewmar screens |
| |
| Freeman #2442-0002 over chain locker |
| |
| 1 x inline blower to provide forced ventilation from inside Portuguese Bridge to owner's cabin |
| |
| 2 x Dorade vents at aft end of foredeck: molded FRP to service guest cabin |
| |
| 2 x Dorade vents on wheelhouse roof: molded FRP |
| |
| Windshield wipers - Imtra 2 speed with auto park RC20991 - use RC529153 parallel arm x 4, with window wash system |
| |
| Horn: Kahlenberg K-380, compressor/tank kit, and 12 volt solenoid valve |
| |
| Spar and boom section: Forespar L.P. painted standing rigging: aluminum strong backs (spar and standing rigging supplied by PAE). 2 x Rule electric winches mounted on boom for raising and lowering dinghy. Maximum dinghy weight - 350lbs |
| |
| Transom door: opens outboard |
| |
| Boat deck rail to be 1 1/4" (3.2cm) diameter |
| |
| Hatch in wheelhouse roof to be Lewmar #Ocean 60 x 1 |
| |
| Deck box on foredeck to have hinged lids with latches and gas shocks and access doors from Portuguese Bridge |
| |
| Includes FRP swim step extension |
| |
| Two removable "U" shaped stanchions for swim step |
| |
| Stainless steel swim ladder mounted on swim step |
| |
| Stainless steel ladder into lazarette |
| |
| |
| * Specifications are subject to change at the discretion of designers and builders |
