Our Team Mason SailBoats Contact Us Home
Nordhavn
35 40 43 46 47 50 55 57 62 64 72 Nordhavn  50
Overview Specs Drawings Slide Show Video Clips Virtual Tour Pricing
 
At A Glance
Design Fundamentals
European Qualifications
Virtual Rendezvous
Information Center
Marketplace
Adventures
Search
  

Specs - Exterior Deck Hardware

1. A. Teak deck (optional) 1/2" finished

2. Teak trim (varnish optional)

A. Cap rail around Portuguese bridge coaming ( Optional )
B. Cap rail around aft bulwark

3. All horizontal surfaces on deck have a diamond pattern non skid as shown in deck plan ? standard non skid to be a contrasting color to parameter deck

4. Chocks for mooring lines

A. Transom: Stainless steel
B. Transom sides: Stainless steel
C. Amidships: Stainless steel
D. Bow: Stainless steel

5. Rub rail - half round stainless steel ? fastened with flush
headed stainless steel fasteners ? Lower aft rub rail is integral to hull

6. Stainless steel ports in hull as shown on design without exterior bezels and built with a double laminate of safety glass ? ports to be opening - x 5 oval. Two 6" S/S ports on inside of Portuguese bridge.

7. Stainless steel double bow roller to accommodate a 60 lb
CQR anchor on starboard roller and the port roller to be
designed for a second light anchor or for mooring lines ?
roller on starboard side to be slotted for chain and the port
roller to be smooth for line ? roller to be built per PAE design

8. A highly polished stainless steel stem plate to be provided
below the bow roller per PAE design

9. Stainless steel rail around foredeck to be 1 1/4 " diameter

10. Molded FRP base to accommodate Optional Maxwell 3500 windlass

11. Lewmar # 87005 hatch on wheel house.

12. Deck hatch in house forward: Lewmar #8700 5.S.

13. Two Dorade vents at aft end of fwd trunk cabin: Molded
FRP to service guest cabin and owner's cabin

14. Windshield wiper: 2 VETUS Pentograph

15. Horns: Electric type ? AFI Model ABT?D Part #10106

16. Spar and boom section: Forespar L.P. painted

17. Standing rigging: Aluminum Strong Backs

18. Wheel house windows: Safety glass ? with side curved
windows tempered glass. All glass 10 mm thick (.39")
side windows partial opening and front windows fixed
Forward facing windows to 12.7 mm thick ( .5" )

19. Salon windows: Safety glass ? partial opening The safety glass is 10MM (.39")

20. Wheel house doors: FRP ? sliding

21. Salon door: FRP ? sliding

22. Transom door opening outboard

23. Stbd door amidships opening outboard

24. Ladder to boat deck: Stainless steel with teak pads

Back To Top

Standard Specifications
Basic Structure
Standard Machinery Details
Steering System
Plumbing System
Electrical System
Interior Finish and Interior Equipment
Exterior Deck Hardware
 
©2003 Pacific Asian Enterprises
®2003 Nordhavn ~ ™2003 Nordhavn
Careers
Created and Designed by Sass Communications