1. Foam cushions thru out boat with vinyl coverings
2. Interior steps to have non-skid inlay. Corners of steps to have non-skid varnish.
3. Interior door handles to be German type (without key) and (with key and dead bolt where necessary) anodized.
4. Interior locker handles to be Timage push button
5. All interior varnish to be semi gloss (40% gloss)
6. Overhead through out entire boat (except at shower stall) to be MAJILITE #6164 vinyl in individual removable panels, held in place with industrial VELCRO.
7. Galley
A. Refrigerator - Sub Zero #611R
B. Countertops:Corien material with fiddles.
C. Flooring: Vinyl overlay- to be specified with order
D. Locker/paneling: varnished teak.
E. LPG stove and oven - FORCE 10 "built in" 3 burner with oven broiler and pot holders. Solenoid operated LPG control and 2 aluminum bottles stowed on port side transom locker.
F. Locker interior finish: Formica white
G. Microwave Oven: GE with built in exhaust # JVM 290BV
H. GE #GCG950T trash compactor
8. Main salon
A. Floors: White Painted plywood with Soundown under layment and carpets
B. Cabinet/paneling: Varnished teak
C. Dinette table: Teak - with high gloss varnish
D. Furniture: 2- Ta Shing style chairs with teak bases the same as NH6201
E. Locker interior finish: Teak
F. Bar stools per P.A.E. design as on N62
G. TV Locker with Tambor doors
9. Master cabin
A. Floors: Painted plywood with carpet
B. Cabinet/paneling: FORMICA with varnished teak trim
C. Hanging locker interior finish: natural finish.
D. Locker interior finish: Teak
10. Master Head
A. Floors: Vinyl overlay- to be specified with order
B. Countertop: "Corien"
C. Mirrors: As shown on drawings.
D. Shower grate: Acrylic perforated 5/8" Thickness
E. Cabinet/joinerwork: FRP
F. Locker interior finish: Formica
G. Head exhaust blower - Dayton #2C646 continuous duty to be controlled with a 30-min timer switch
H. Toilet paper holder: VECA #1417.02.11 white
I. Polished aluminum clear door
J. Stainless steel towel holders
11. Guest cabins
A. Floors: painted plywood with carpet
B. Cabinet/joinerwork: Teak with solid teak trim
C. Locker interior finish: Formica
D. Wood hull ceiling on hull outboard side of staterooms to be painted color #W520 "satin" finish to match overhead
12. Guest heads
A. Floors: Vinyl overlay- to be specified with order
B. Countertops: "Corien" with sinks made of same material and molded in.
C. Mirrors: As shown on drawings
D. Shower grate: Acrylic perforated 5/8" Thickness
E. Locker interior finish: Formica
F. Head exhaust blower - Dayton #2C646 continuous duty to
be controlled with a 30-min timer switch
G. Toilet paper holders: VECA #1417.02.11 white
H. Polished aluminum clear door - P.A.E. to supply
I. Cabinet/joinerwork: FRP with white trim
J. Shower interior - FRP with white trim
K. Stainless steel towel holders
13. Forepeak
A. Shelves: Longitudinal plywood shelves with 5" fiddles provided port and starboard for storage
B. Finish: Painted with gray gel coat
C. Provide one pad eye for bitter end of chain
D. Storage space for chain to extend to forward compartment under berth at fwd. guest cabin.
14. pilothouse
A. Floors: Teak and Spruce - Varnished satin gloss
B. Cabinet/joinerwork: Varnished teak
C. Countertops and instrument panel faces: Formica #912
dark gray.
D. Dinette table: Teak with high gloss varnish
E. Settee
F. Helmseat - POMPANETTE #AS17
G. Chart light: Aqua Signal 3132 012.
H. All removable panels in instrument console to fit into teal "Y" or "L" moldings.
15. Solid (non louvered) doors for heads and staterooms
16. All teak handrails shown on design are to be included
17. Bull nose console bottom going down to stateroom.
LIGHTING
1. Main overhead lighting thru out interior is to be recessed Cantalupi "Walter 2001" Lighting controlled by Australian Clipsal wall switches.
2. Exterior overhead lights to be recessed stainless steel dome light X 11 (9 around aft deck, 2 on flybridge
under arch)
3. Overhead reading lights: AAA #00902 Black
4. Engine room lights: 8 each -- 12-volt (Stainless steel dome lights) plus 3 x 110 volt AQUASIGNAL #1094-432
5. Interior and exterior courtesy lights
A. Interior: Cantalupi "Rondetto"
B. Exterior: Cantilupi "Rondetto"
6. Hanging locker lights: AAA 00532 S.S.
7. Running lights: Aqua Signal
A. Port nav light - #3544 202 12-volt
B. Star nav light - #3543 102 12-volt
C. Stern light - #3541 002 12-volt
D. Steaming light - #3030 002 12-volt
E. Anchor light - #3506 032W 12-volt
8. Owner's cabin to have two Cantilupi "Vienna" chrome
FLYBRIDGE DETAILS
1. Includes engine instrumentation, engine controls, steering station.
2. Arch and guest seating per design
3. Pompanette helm chair # AS17 with a stainless steel pedestal
4. Seating cushions to be closed cell foam with buyer choice of vinyl color - bottom cushion to be 5" and seat back
to be 3"
5. Teak table with two S/S pedestals
