| Hynautic hydraulic steering system # MS2175-41-1 comprised of the following components: |
| Slave cylinder "SeaStar" # HC5802HY x two (2) |
| Helm pump model #H-41 x two (2) |
| Reservoir model #R-06 x one (1) |
| Relief valve MSV-21 x one (1) |
| Helm fitting #HF-21 x one (1) |
| Relief fitting # MSVF-13 x one (1) |
| 1/2" (1.27 cm) copper fittings #MSRF-01 |
| Stainless steel tiller arm to suit dual ram installation |
|
| Hydraulic lines: Hynautic brand/copper tubing |
|
| Steering wheel: 30" (76.2 cm) SS destroyer type for flybridge and pilothouse |
|
| Emergency tiller: to attach to top of rudder post and stow in lazarette |
|
| By-pass valve for emergency tiller steering |
|
| RUDDER: |
| |
| Rudder stock: 2-3/4" (6.98 cm) stainless steel |
|
| Rudder backbone plate: 3/8" (9.5 mm) stainless steel with lightening holes sheathed in FRP and foam - per PAE design. |
|
| Bronze rudder carrier shoe: cast bronze per design |
|
| Rudder carrier top: Stainless steel with collar bearing per design |
| Collar bearing similar to N47 |
|
| Rubber cutlass bearing at rudder port opening |
|
| Rudder stock stuffing box: bronze |
|
| Rudder stock tube: FRP |
