Specs
Standard Specification
Basic Structure
Standard Machinery Details
Steering System
Rudder
Plumbing System
Electrical System
Interior Finish and Interior Equipment
Lighting
Exterior Deck Hardware

 

Specifications are subject to change at the discretion of designers and
builders

    Per PAE design #NMS5600GO1
     
1.   GALLEY
  a. Refrigerator: U-Line Origin model # 1175R (black)
  b. Freezer: U-Line Origin model #75F (Black)
  c. Countertops: Corian with teak fiddles
  d. Flooring:Teak and Spruce with satin varnish
  e. Cabinetry/paneling - teak with 60% gloss varnish
  f. Force Ten # 63356 three burner with oven- LPG gimbaled.
  g. GE microwave oven #PEM31SMSS - non-convection
  h. GE Trash compactor - GCG1580LSS
  i. Overhead: individual padded Majalite vinyl panels secured in place with 3M industrial Velcro and easily removable for service of deck hardware and wiring
  j. Locker interior finish: white formica
  k. Dinette with fixed teak table at aft end of galley.
     
2.   MAIN SALON / WHEEL HOUSE
  a. Flooring:Teak and Spruce with satin varnish
  b. Cabinetry/paneling - teak with 60% gloss varnish
  c. Dinette table: teak with high gloss finish and "sunburst" design
  d. Furniture: settees as designed with all detail as shown in layout drawing
  e. Overhead: individual padded vinyl Majalite panel secured in place with 3M industrial Velcro
  f. Locker interior finish: varnished teak with satin finish
  g. Cushion fabric to be Ultraleather
  h. Teak valance over side and aft windows to be incorporated into air con soffit like N72
  i. Two chairs with locker in between on port side
  j. Space for flat screen TV on lift in cabinet located on port side of Salon.(TV and lift optional)
  k. Stidd "Slim Line" helm chair
  l. Helm station and dash with teak and Black laminate finish. Black Majelite covered dash hood.

3.   MASTER CABIN
  a. Flooring:Teak and Spruce with satin varnish
  b. Cabinetry/paneling - teak with 60% gloss varnish (high gloss optional)
  c. Mirror above dresser
  d. Locker interior finish: white formica (varnished teak optional, as on N72)
  e. Foam mattress with cotton cloth ticking
  f. All visible hull surfaces within stateroom (not including locker interiors) - to have horizontal teak staving with satin varnish finish (high gloss optional)
  g. Counter tops teak veneer with solid teak fiddles
  h. Dropped overhead overhead of berth with recessed lighting with book shelves at the sides
  i. Overhead: individual padded Majalite vinyl panels secured in place with 3M industrial Velcro
     
4.   HEADS
  a. Flooring:Teak and Spruce with satin varnish
  b. Countertop: Corian with teak fiddles
  c. Mirrors in front of sink. Opening doors
  d. Shower pan - white - gelcoated FRP with non-skid including aluminum and glass bi-fold shower doors. Shower overhead panels to be FRP
  e. Overhead: individual padded Majalite vinyl panels secured in place with 3M industrial Velcro
  f. Locker interior finish: white formica
  g. Exhaust blower: 24v Rule 140 on 30 minute timer
  h. Stainless steel towel bars
  i. Cabinetry/paneling - teak with 60% gloss varnish
     
5.   FOREPEAK
  a. Painted with white gelcoat
  b. Drain to bilge through a PVC pipe installed during hull lamination
  c. Shelves at outboard sides for line storage
     
6.   GUEST CABIN
  a. Flooring:Teak and Spruce with satin varnish
  b. Cabinetry/paneling - teak with 60% gloss varnish
  c Overhead: individual padded vinyl Majalite panels secured in place with industrial Velcro
  d. Locker interior finish: white formica (varnished teak optional, as on N72)
  e. Foam mattress with cotton cloth ticking
  f. Seat with cushion and storage under
  g. All visible hull surfaces within stateroom (not including locker interiors) - to have horizontal teak staving
  h. Counter tops teak veneer with solid teak fiddles
     
7.   All locker doors and drawers to have push button style latches
     
8.   All interior stateroom doors and door hardware to be Mobella like N72 including gasket seals.
     
9.   LIGHTING per PAE drawings
  a. Main overhead lighting throughout: Cantalupi "Walter" 2001 24vdc with wall switches for each designated area as shown on plan
  b. Guest cabin reading lights : Cantalupi "Vienna" 24vdc chrome x 2
  c. Engine room lights: AC fluorescent - 2 x 24" (61cm) dual bulb (#1616K81) switch at entrance to engine room. Lazarette lights: AC flourescent - 2-24" dual bulb (#1616K81) with switch in laz at enterance hatch. Additionally - 4 x 24 volt dome lights in engine room and 4 x 24 volt dome lights in lazarette (McMaster Carr)
  d. Exterior dome lights: Cantalupi "Tuna" 24vdc #CN20901 (2 on aft deck)
  e. Navigation lights: Hella 24vdc P&S #62210/62209, stern #62208
  f. Owners cabin reading lights: Cantalupi "Vienna" 24vdc chrome x 2
  g. Courtesy lights LED Cantilupi "Storm" 24vcd as shown on lighting plan
  h. Vanity lights: Cantalupi "Tebe" 2000 24vdc x 6 ( 2 at owners sink, 2 at guest sink)
     
10.   All hand rails shown on drawings to be included


Last updated: 3/18/08


Back To Top

 


 
























 

 

 

 

 

 

 

 













     
     
©2008 Pacific Asian Enterprises
®2008 Nordhavn ~ ™2008 Nordhavn
Website comments?
 
Created and Designed by Harlow Media Arts