1. A.C. SYSTEM per P.A.E. drawing
A. Vessel to have 120/240 volt 60 cycle system with two 50
amp Marinco #6373 shore cord inlets. Current to be distributed thru P.A.E. electrical panel containing 120/240 volt and 12-volt sections.
B. Outlets to be standard US format 120VAC (Australian Clipsal brand). Locations shown on drawing.
C. All outlets in head compartment, galley, exterior and engine room to be GFI type.
D. All external outlets to have water proof covers
2. DC Electrical and Batteries
A. House batteries to include 5-LIFELINE AG 8D (255 amp each).Each battery to be routed thru a HELLA 87181 disconnect switch
B. Main engine starting to be 2-LIFELINE AGM 8D ( 255 amp each) in parallel. Generator starting to be 1-LIFELINE AGM 4D (210 amp).
C. Each battery to be secured with s/s plates.
D. Battery charging accomplished thru one TRACE 2500 watt inverter/130amp charger, main engine alternators, generator alternator and wing engine alternator
E. Main Engine, Generator, and wing engine to parallel into house battery system using the HELLA 87181
3. Battery cable: To be sized per electrical drawing and color coded.
4. When possible wiring to be color coded per ABYC standards
5. All wiring to be "tinned" copper
6. Conduits for future installations
A. PVC pipe from engine room to pilothouse
B. PVC pipe from radar arch to pilothouse
7. SSB radio ground plate
8. Electrolytic control
A. All thru-hulls to be bonded together with a #8 green wire and tied into the 12-volt DC ground system
B. All hardware mounted below waterline - i.e. stuffing box, rudder shoe, rudder frame, rudder stuffing box to be grounded into 12-volt DC ground system
C. 2 zinc plates to be tied into the 12-volt DC ground system
D. S.S. Rudder shoe to have Zinc Plate B-4
9. AC Genset - Northern lights M843N 12KW with sound shield providing 120/240 volt current at 60HZ.
A. Fuel filter to be 900-FG Racor
B. Gen-Sep gas/water separater system
10. Electrical panels to distribute ship's AC and DC power to be manufactured and supplied by P.A.E.
11. Lightning ground: Run the wire inside of the stack locker on flybridge
