| Hynautic / Teleflex hydraulic steering system comprised of the following components: |
| Slave cylinder "SeaStar" # HC5802HY x 2 |
| Helm pump model #H-41 x 1 |
| Reservoir model #R-06 x 1 |
| Relief valve MSV-21 x 1 |
| Helm fitting #HF-21 x 1 |
| Relief fitting # MSVF-13 x 1 |
| Copper fittings: 1/2" (1.27cm) #MSRF-01 |
| Tiller arm: Stainless steel to suit dual ram installation |
| |
| Hydraulic lines: Hynautic brand/copper tubing |
| |
| Steering wheel: 30" stainless steel destroyer type |
| |
| Emergency tiller: to attach to top of rudder post and stow in lazarette |
| |
| By-pass valve for emergency tiller steering |
| |
| RUDDER: |
| |
| Rudder stock: 2 3/4" (6.98cm) stainless steel |
| |
| Rudder backbone plate: 3/8" (9.5mm) stainless steel with lightening holes sheathed in FRP and foam per PAE design |
| |
| Bronze rudder carrier shoe |
| |
| Rudder carrier top: Stainless steel with collar bearing per design |
| Collar bearing similar to the Nordhavn 55 |
| |
| Rubber cutlass bearing at rudder port opening |
| |
| Rudder stock stuffing box: bronze |
| |
| Rudder stock tube: FRP |
