| Cushions throughout boat with buyer's choice of factory supplied leather |
| Interior steps to be all teak. Corner of steps to have non-skid varnish |
| Interior lockers and drawers to be locking Timage with chrome push button |
| Interior overhead panels - Majilite or equivalent, vinyl covering. Removable, held in place by Velcro |
| Interior door lock sets to be Mobella # 3635U "Mc Coy" chromed brass with all chrome trim ring |
| Interior cabin doors to have door hooks |
| Hanging lockers to have automatic interior lights controlled by micro switch. Lined with "Cedar" wood |
| Solid (non louvered) cored doors for heads and staterooms 1" (2.5 cm) thick |
| Interior teak woodwork including cabin sole in pilot house to be varnished with 60% gloss varnish |
| Salon table, pilothouse table to be varnished with high gloss varnish |
| All hand rails to be teak |
| Structural bulkheads dividing staterooms and heads to have 3/4” (1.9 cm) furring strips on each side to allow application of 3/4” (1.9 cm) thick sound insulation. The finished bulkhead material of 3/8” (9.5 cm) thickness to be applied over this |
| Hull staving to match the overhead material |
|
| Galley |
| Sub zero # 736TC refrigerator/freezer with teak panels |
| Counter top: Granite with bull nosed edges |
| Flooring: Ceramic tile or limited selection factory stone tile |
| Cabinet paneling: All teak |
| GE cooktop stainless steel LPG cooktop # JGP933SEKSS |
| GE stainless steel electric convection wall oven 220 volt AC # PK916SMSS |
| Locker and drawer interior finish: Formica white |
| GE "Advantium" # SCA1001KSS convection/microwave oven with exhaust blower |
| GE Profile stainless steel trash compactor - 15" (38.1 cm) # GCG1580LSS |
| Dishwasher 18" (45.7 cm) Miele # G 1202 Sci |
| Garbage disposal Insinkerator 3/4hp "Pro Essential" # 444SS. Includes pneumatic switch |
| Stove backsplash to be lined with granite |
|
| Main Salon |
| Floors: Carpet with Soundown underlayment pad |
| Cabinet/paneling: Varnished teak |
| Locker interior finish: Wood veneer |
| Bar stools three (3) per PAE design |
| Aritex lift system for 42" (106.7 cm) flat screen TV installed starboard aft corner. (TV not included) |
| Teak valance/air con soffit port and starboard and aft sides of salon |
| Two overhead teak hand rails |
| Settee along starboard side with storage under |
| Dinette on port side |
| Teak end tables starboard side |
|
| Master Cabin |
| Floors: Carpet with Soundown underlayment pad |
| Cabinet/paneling: Varnished teak |
| Hanging locker interior finish: "Cedar wood" natural finish |
| Space for flat screen TV (TV and lift not included) |
| Vanity with chair starboard side |
| Mattresses: Foam with mattress ticking |
|
| Master Head |
| Flooring: Ceramic tile or limited selection of factory stone tile |
| Counter top: Granite with bull nosed edges |
| Mirrors and towel bars: As shown on drawings |
| Molded FRP shower stall |
| Cabinet/joiner work: All teak |
| Locker and drawer interior finish: Formica |
| Head exhaust blower with 30 minute timer |
| Toilet paper holder: Chrome |
| Aluminum/glass bi-fold shower door |
|
| Port Guest Cabin Forward |
| Floors: Carpet with pad |
| Cabinet/joiner work: Teak paneling with solid trim |
| Hanging locker interior finish: "Cedar wood" natural finish |
| Mattresses: Foam with mattress ticking |
|
| Stbd. Guest Cabin Forward |
| Floors: Carpet with pad |
| Cabinetry and joiner work: Teak |
| Hanging locker with "Cedar wood" lining |
| Book shelves and lockers outboard of berths |
| Drawers under berths (4 total) |
| Mattresses: Foam with mattress ticking |
|
| Guest Head Forward |
| Flooring: Ceramic tile or limited selection factory stone tile |
| Counter tops: Granite with bull nosed edges |
| Mirrors and towel bars: As shown on drawings |
| Molded FRP shower stalls |
| Locker and drawer interior finish: Formica |
| Exhaust blower with 30 minute timer |
| Toilet paper holders: chrome |
| Aluminum and glass bi-fold shower door |
| Cabinet/joiner work: All teak |
|
| Pilot House |
| Floors: Teak and Spruce - varnish |
| Cabinet/joiner work: Varnished teak |
| Counter tops and instrument panel faces: Formica # 909-58 matte black |
| Dinette table: Teak with high gloss varnish |
| Settee with chart drawers under |
| Helm seat - One (1) Stidd 500N-2X2 Low Back "Slimline". Ultraleather and pedestal color are buyer's choice |
| Chart light: "F4" Touch LED light, bulkhead mount - 19" (48.3 cm) |
| Locker interior finish: Wood veneer |
| Book shelves and chart drawers as shown on drawings |
| Hand rails: One each on the port and starboard foreward doors |
| Compass- Ritchie SS 5000 5" (12.7 cm) |
| Pilot berth standard double |
| Chart table with book shelves and chair |
| Hanging locker |
|
| Forepeak (Chain Locker) |
| Shelves: Longitudinal FRP shelf for storage of spare anchor line |
| Anchor line deck hawse fitting |
| Two pad eyes in locker |
| Finish: Painted with gray gel coat |
|
| Laundry Area |
| Washer and dryer: Bosch washing machine # WAS24460UC and 240 volt AC Bosch dryer # WTV76100UC located outside the engine room |
| Two (2) U-Line 75F 6.0 cubic feet (1.83 cubic m) front load freezers located lower level laundry area |
| Work surface with storage above and below |
| Finish: Formica with teak trim |
| Floors: Lonseal |
|
| Lower Day Head |
| Flooring: Ceramic tile or limited selection factory stone tile |
| Cabinetry: Teak |
| Toilet paper holder |
| Exhaust blower with 30 minute timer |
| Counter tops: Granite with bull nosed edges |
