Welcome to Nordhavn.com - Power Thats Oceans Apart
   
 
side_menu



Basic Structure

Hull lamination schedule per construction plan

Vinylester resin used in first laminations

All exterior gelcoat to be White Ferro Super Shield on superstructure and Arocoat brand on hull and non-skid


Deck lamination schedule per construction plan


Core:

Cabin side (vertical surfaces): Foam Klegcell R75 or equivalent cross-linked foam

Cabin top and deck (horizontal surfaces): E.G.B. 9 -12 lbs. (3.4 kg - 4.5 kg) per sq. ft. Baltek

Hull interior: solid series of laminates


Deck/hull joint:

Between deck and hull flange: 3M 5200

Inside of joint: Two (2) layers M & W.R.

Mechanical fastening: 1/4" (6.35 mm) x 20unc stainless steel thrubolt on 6" (15.2 cm) centers where accessible. In areas that cannot be accessed self-tapping machine screws used


Longitudinal Stringer

Hull: port and starboard, engine beds and floor stringers - topside stringers - longitudinal and vertical

Deck: per design


Interior floors: per design for salon floor and forward engine room bulkhead structure to be of Nidacore composite as done on N50.


Ballast: Lead approx. 7,400 lbs (3.36 metric tons)


Gelcoat Colors (standard boat)

Hull: Arocoat #340 gray

Deck: Ferro White Supershield

Non-skid: Arocoat - light gray - to match CCP color chart #A139

Boot-top and stack stripes: Arocoat #348 dark blue


*Specifications subject to change without notice and at the discretion of designers and builders.
**Dimensions are subject to change with Buyer’s selected options and personal effects which may add to displacement and increase both draft and waterline length

Last updated: 7/28/09

 

 



Nordhavn Fleet

40

43

52

56MS

60

62

63

64

68

72

75EYF

76

78

86

120