Rudder stock: 2-3/4" (6.98 cm) stainless steel
Rudder backbone plate: 3/8" (9.5 mm) stainless steel with lightening holes sheathed in FRP and foam - per PAE design.
Bronze rudder carrier shoe: cast bronze per design
Rudder carrier top: Stainless steel with collar bearing per design
Collar bearing similar to N47
Rubber cutlass bearing at rudder port opening
Rudder stock stuffing box: bronze
Rudder stock tube: FRP
*Specifications subject to change without notice and at the discretion of designers and builders.
**Dimensions are subject to change with Buyer’s selected options and personal effects which may add to displacement and increase both draft and waterline length
Last updated: 11/27/11
|
