BASIC STRUCTURE

Hull lamination schedule per construction plan 

Vinylester resin used in first laminations

All exterior gelcoat to be White Ferro Super Shield on superstructure and Arocoat brand on hull and non-skid

Deck lamination schedule per construction plan 

Core:

Cabin side (vertical surfaces): Foam Klegcell R75 or equivalent cross-linked foam

Cabin top and deck (horizontal surfaces): E.G.B. (9-12 lbs.) ( 3.4 - 4.5 kg) per sq ft Baltek

Hull interior: solid series of laminates

Deck/hull joint:

Between deck and hull flange: 3M 5200

Inside of joint: Two (2) layers M & W.R.

Mechanical fastening: 1/4" (6.35 mm) x 20unc stainless steel thru bolt on 6" (15.2 cm) centers where accessible.  In areas that cannot be accessed self-tapping machine screws used

Longitudinal Stringer

Hull: Six (6) full length port and starboard, engine beds and floor stringers - topside stringers - longitudinal and vertical

Deck: per design 

Interior floors: per design - for salon floor and forward engine room bulkhead structure to be of Nidacore composite as done on N47

Ballast: Lead approx. 8,500 lbs (3.17 metric tons)

Gelcoat Colors (standard boat)

Hull: Arocoat #340 gray

Deck: Ferro White 

Non-skid: Arocoat - light gray - to match CCP color chart #A139

Boot-top and flybridge stripes: Arocoat #348 dark blue