|
All horizontal surfaces on deck have a diamond pattern non-skid as shown in deck plan. Standard non-skid to be a contrasting color to parameter deck
|
|
|
|
Chocks for mooring lines:
|
|
Transom: stainless steel with attached cleat - recessed x one (1)
|
|
Transom sides: stainless steel with attached cleat - recessed x two (4)
|
|
Amidships: stainless steel with attached cleat - recessed x four (4)
|
|
Bow: stainless steel with attached cleat x two (2)
|
|
12" (30.5 cm) stainless steel cleat at bow x two (2)
|
|
|
|
Lower and upper rubrails FRP with a stainless steel cap - rub rails integral to hull
|
|
|
|
Ports - Oval 16" x 7" (40.6 cm x 17.8 cm) stainless steel ports in hull as shown on design with tempered glass - all hull ports to include stainless steel deadlights - eight (8) in hull. One (1) 12" (30.5 cm) round port aft in pilot house day head.
|
|
|
|
Galley oval port - 16" x 7" (40.6 cm x 17.8 cm) stainless steel (one of eight above)
|
|
|
|
Bow roller: FRP and stainless steel double bow roller with bronze rollers to accommodate a 170 lb. (77 kg) plow type anchor on starboard roller and the port roller to be designed for a second light anchor or for mooring lines. Roller on starboard side to be slotted for chain and the port roller to be smooth for line - roller to be built per PAE design
|
|
|
|
Stainless steel stanchions around foredeck to be 1-1/4" (3.2 cm) diameter. Pulpit to be 1-1/4" (3.2 cm) diameter
|
|
|
|
Maxwell 24 volt VWC 3500 windlass with 1/2" (1.27 cm) HT chain wheel, to be mounted on a molded FRP base
|
|
Chain: Install 400' - 1/2" HT (122 m - 1.27 cm) chain
|
|
Maxwell chain stopper mounted on bow roller
|
|
Anchor: 170 lb. (63.5 kg) stainless steel plow type anchor
|
|
|
|
Hatches: Foredeck hatches to be three (3) Lewmar #Ocean 60 with Lewmar screens. One (1) Freeman #18HAALR over chain locker. Day head hatch in pilot house to be Lewmar #Ocean 20 with screen. Optional skylight hatch in aft side of bridge, over master room vanity to be Lewmar #Ocean 30 with screen
|
|
|
|
One (1) Dayton #2C647 110 volt blower to provide forced ventilation from inside Portuguese Bridge to owner's cabin
|
|
|
|
Davit - Steelhead Esprit 1500 lb (680 kg) - manual extension to 12' (3.66 cm) - 24 volt davit
|
|
|
|
Windshield wipers - Imtra 2-speed 24 volt with auto park #RC524992, #EX2108 pantograph arm x four (4), with 24 volt window wash system, wiper control panel #EX2160604 for four (4) motors
|
|
|
|
Horn: Kahlenberg K-380, compressor/tank kit, and 12 volt solenoid valve
|
|
|
|
Aft deck:
|
|
FRP stairway to boat deck with stainless steel hand rail
|
|
FRP console with sink, faucet, drawers and lockers per PAE design
|
|
Hatch to lazarette x two (2) with gas shocks
|
|
Shower Scandvic recessed shower box #10640640
|
|
|
|
Windows and doors:
|
|
Wheel house and salon windows to be 12 mm tempered glass by Diamond Seaglaze
|
|
Two of the front wheel house windows fixed above with lower hinged vent section with double dogs and ss telescoping supports
|
|
Wheelhouse doors: Diamond Seaglaze - Dutch - four hinged door with upper and lower dogs in addition to deadbolts and locksets. R250 series - door #9 21" x 72" (53.3 cm x 182.88 cm) left and right
|
|
Salon door: Diamond Seaglaze - Dutch - four hinged door with window and double dogs in addition to deadbolt and lockset. R250 series - door #10 32" x 73" (81.28 cm x 185.42 cm)
|
|
|
|
Transom doors: open outboard
|
|
|
|
Boat deck rail to be 1-1/4" (3.2 cm) diameter
|
|
|
|
Portuguese bridge locker with double doors accessed from inside P/B
|
|
|
|
Three removable "U" shaped stanchions for swim step
|
|
|
|
Stainless steel swim ladder mounted on swim step
|
|
|
|
Stainless step into lazarette
|
|
|
|
Flybridge:
|
|
Engine controls: Morse model #31001-001 Twin S with Morse #33C Supreme cables
|
|
30" (76.2 cm) stainless steel Destroyer type wheel
|
|
Engine control panel, horn switch, windlass control
|
|
Settee with FRP table and white vinyl cushions
|
|
Todd helm chair #1500-01D
|
|
Stainless steel ladder to boat deck
|
|
All rails and venturi as shown on design
|
|
|
|
FRP exhaust stack per PAE design
|
|
|
|
Deck drains: (Per PAE deck plan)
|
|
Foredeck/ anchor well: Two (2) 2" (5.08 cm) scupper drains through boot top port & starboard and two (2) aft at fwd end of P/B to drain through boot top P&S.
|
|
Side deck: Three (3) 2" (5.08 cm) scupper one aft, one mid and one at the bottom of the stairs to P/B. Additionally there will be four (4) large 14" x 6" (35.6 cm x 15.2 cm) freeing port with flaps to drain large amounts of water.
|
|
Boat deck: Six (6) total 2" (5.08 cm) scupper (3 ) P&S
|
|
Flybridge: Four (4) total (2 ea) P&S
|
|
|
|
Side deck boarding door to be two piece. Top to hinge and fold up and over and bottom to open outboard. Use freeman "blind" dog set to secure door.
|
|
|
|
All exterior locker doors to use Perko fig.777 flush hatch dogs
|
|
|
|
All exterior door keeps to be ABI #2039CH
|
|
|
|
Install NORDHAVN 60 name plates from Aritex.
|
|
|