All horizontal surfaces on deck have a diamond pattern non-skid as shown in deck plan. Standard non-skid to be a contrasting color to parameter deck

Chocks for mooring lines:

Transom: stainless steel with attached cleat - recessed x 1

Transom sides: stainless steel with attached cleat - recessed x 4

Amidships: stainless steel with attached cleat - recessed x 2

Bow: stainless steel with attached cleat x 4

2 x 12" (30.5cm) stainless steel cleat at bow

Lower and upper rubrails FRP with a stainless steel cap - rub rails integral to hull

Ports: (7) oval 16" (40.6cm) x 7" (17.8cm) & (3) rectangular 34" (86.4cm) x 16" (40.6cm) stainless steel ports in hull as shown on design with tempered glass - all hull ports to include stainless steel deadlights

Bow roller: FRP and stainless steel double bow roller with bronze rollers to accommodate a 170lb. Anchor on starboard roller and the port roller to be designed for a second lighter anchor or for mooring lines. Roller on starboard side to be slotted for chain and the port roller to be smooth for line - roller to be built per PAE design

Stainless steel stanchions for lifelines around the foredeck to be 1 1/4" (3.2cm) diameter. Railing from the raised section in the foredeck bulwarks around the bow pulpit to be 1 1/4" (3.2cm) diameter

Windlass: Maxwell 24 volt VWC 3500 windlass with 1/2" (1.27cm) HT chain wheel, to be mounted on a molded FRP base

Chain: 400 ft 1/2" (1.27cm) HT chain

Maxwell chain stopper mounted on bow roller

Anchor: 170lb. (63.5kg) stainless steel plow type anchor

Foredeck hatches to be (2) Lewmar Ocean 30 series & (2) Lewmar Ocean 70 series with Lewmar screens. One (1) Freeman #18HAALR over chain locker. Pilot house hatches to be (1) Lewmar Ocean 70 series with screen, (1) Lewmar Ocean 30 series with screen in the captain's cabin, and (1) Lewmar Ocean 30 series with screen in the captain's cabin head. Skylight hatch in port side of bridge, over galley to be Lewmar Ocean 30 series with screen

Blower: (1) x Dayton #2C647 110V blower to provide forced ventilation from inside Portuguese bridge to owner's cabin

Davit: Steelhead ES1500 telescoping yacht crane with 1500lbs. safe working load at full extension. 8' retracted with 12' extended reach. 3 function hydraulics - luffing, rotation, and winch. 24V electric HPU and extention

Windshield wipers - Imtra 2 speed 24V with auto park #RC524992, #EX2108 pantograph arm x 4, with 24V window wash system, wiper control panel #EX2160604 for 4 motors

Horn: Kahlenberg K-380, compressor/tank kit, and 12 volt solenoid valve

Cockpit:

Hatch to lazarette with gas shocks

Shower Scandvik recessed shower box #10640640

Windows and doors:

Wheel house and salon windows to be FRP framed with 12mm tempered glass

Pilothouse doors: Diamond Seaglaze - Dutch - four hinged door with upper and lower dogs in addition to deadbolts and locksets. R250 series - door #9 21"x72" (53.3cm x 182.88cm) left and right

Salon door: Diamond Seaglaze - Dutch - four hinged door with window and double dogs in addition to deadbolt and lockset. R250 series - door #10 32"x73" (81.28cm x 185.42cm)

Transom door: Pantograph hinged type - starboard side

Upper aft deck rail to be 1 1/4" (3.2cm) diameter

Portuguese bridge lockers with double doors accessed from inside the Portuguese bridge

Pantograph hinge door leading from the Portuguese bridge to the foredeck

Four removable "U" shaped stanchions for swim step

Stainless steel swim ladder mounted on swim step

Stainless steel step into lazarette

FRP exhaust stack per PAE design

Deck drains: Per PAE deck plan

Side deck boarding door to be two piece. Top to hinge and fold up and over and bottom to open outboard. Freeman "blind" dog set to secure door

All exterior locker doors to use Perko fig.777 flush hatch dogs

All exterior door keeps to be ABI #2039CH

All exterior locker doors to have stainless steel louvered vents

Bollards: (4) Stainless steel Aritex #A251 Type 400 stainless steel 316 on foredeck

NORDHAVN 63 name plates from Aritex