General:

Cushions throughout boat with buyer's choice of factory supplied leather

Interior steps to be all teak. Corner of steps to have non-skid varnish

Interior lockers and drawers to be locking "Timage" with chrome push button

Interior overhead panels - Majilite or equivalent, vinyl covered. Removable, held in place by Velcro

Interior door lock sets to be Mobella # 3635U "Mc Coy" chromed brass with all chrome trim ring

Interior cabin doors to have door hooks

Hanging lockers to have automatic interior lights controlled by micro switch. Lined with "Cedar" wood

Solid (non louvered) cored doors for heads and staterooms 1" (2.54 cm) thick

Interior teak woodwork including cabin sole in pilot house to be varnished with 60% gloss varnish

Salon table, pilothouse table to be varnished with high gloss varnish

All hand rails to be teak

Structural bulkheads dividing staterooms and heads to have 3/4” (1.9 cm) furring strips on each side to allow application of 3/4” (1.9 cm) thick sound insulation. The finished bulkhead material of 3/8” (9.5 mm) thickness to be applied over this

Hull staving to match the overhead material

Galley

Sub zero # 700TCI refrigerator/freezer with teak doors

Counter top: Granite with bull nosed edges

Flooring: Ceramic tile or limited selection of factory stone tile

Cabinet paneling: Varnished teak (including appliance alcoves)

GE cooktop stainless steel LPG cooktop # JGP933SEKSS

GE stainless steel electric convection wall oven 220 volt AC # PK916SMSS

Locker and drawer interior finish: Formica white

GE "Advantium" # SCA1001KSS convection/microwave oven with exhaust blower

GE Profile 15" (38.1 cm) stainless steel trash compactor # GCG1580LSS

Dishwasher 18" (45.7 cm) Miele # G 1202 Sci

Garbage disposal Insinkerator 3/4 hp "Pro Essential" # 444SS. Includes pneumatic switch

Stove backsplash and area under raised bar to be lined with granite

Sub zero # 700 drawer freezer with teak doors. Installed under stairway at port side

All appliances with doors to be fitted with a secure locking mechanism

Main Salon

Floors: Carpet with Soundown underlayment pad

Cabinet/paneling: Varnished teak

Locker interior finish: Wood veneer

Bar stools three (3) per PAE design

Aritex lift system for 42" (106.7 cm) flat screen TV installed starboard aft corner (TV not included )

Teak valance/air con soffit port and starboard and aft sides of salon

Two overhead teak hand rails

Built in settee along port side

Dining table on starboard side with six chairs

Book shelves under stairway at forward end

Master Cabin

Floors: Carpet with Soundown underlayment pad

Cabinet/paneling: Varnished teak

Hanging locker interior finish: "Cedar wood" natural finish

Space allocated for flat screen TV on lift system up to 50" (127 cm) - (TV and Lift are not included)

Custom chair starboard side

Mattresses: Foam with mattress ticking

Book shelves as drawn

Master Head

Flooring: Ceramic tile or limited selection of factory stone tile

Counter top: Granite with bull nosed edges

Mirrors and towel bars: As shown on drawings

Molded FRP shower stall

Cabinet/joiner work: All teak

Locker and drawer interior finish: Formica

Head exhaust blower with 30 minute timer

Toilet paper holder

Frameless glass shower door

Hanging locker and dresser as drawn

Port Guest Cabin

Floors: Carpet with pad

Cabinet/joiner work: Teak paneling with solid trim

Hanging locker interior finish: "Cedar wood" natural finish

Mattresses: Foam with mattress ticking

Guest Head Forward

Flooring: Ceramic tile or limited selection of factory stone tile

Countertops: Granite with bull nosed edges

Mirrors and towel bars: As shown on drawings

Molded FRP shower stall

Locker and drawer interior finish: Formica

Exhaust blower with 30 minute timer

Toilet paper holders

Aluminum and glass bi-fold shower door

Cabinet/joiner work: All teak

Pantry locker with adjustable shelves next to the galley

Starboard Guest Cabin

Floors: Carpet with pad

Cabinet/joiner work: Teak paneling with solid trim

Hanging locker interior finish: "Cedar wood" natural finish

Mattresses: Foam with mattress ticking

Guest Head Starboard

Flooring: Ceramic tile or limited selection of factory stone tile

Countertops: Granite with bull nosed edges

Mirrors and towel bars: As shown on drawings

Molded FRP shower stalls

Locker and drawer interior finish: Formica

Exhaust blower with 30 minute timer

Toilet paper holders

Aluminum and glass bi-fold shower door

Cabinet/joiner work: All teak

Pilothouse

Layout per PAE drawing

Floors: Teak and spruce - varnish

Cabinet/joiner work: Varnished teak

Countertops and instrument panel faces: Formica # 909-58 matte black

Dinette table: Teak with high gloss varnish.

"U" shaped settee with chart drawers under

Helm seat - One (1) Stidd 500N-2X2 Low Back "Slimline". Ultra leather and pedestal color are buyer's choice

Chart light: "F4" Touch LED light, bulkhead mount. 19" (48.3 cm)

Locker interior finish: Veneer wood

Book shelves and chart drawers as shown on drawings

Hand rails: One (1) each at the port and starboard doors

Compass - Ritchie SS 5000 5" (12.7 cm)

Pilot berth with 5" (12.7 cm) thick foam mattress behind settee with storage under

Chart table with drawers and slide-out shelf for printer (Printer not included)

Desk with large file drawers

Teak and stainless steel stairs going up to flybridge as on N72

Pilothouse Head

Flooring: Teak and spruce - varnished

Cabinetry: Varnished teak

Toilet paper holder

Exhaust blower with 30 minute timer

Countertops: Granite with bull nosed edges

Forepeak (Chain Locker)

Shelves: Longitudinal FRP shelf for storage of spare anchor line

Anchor line deck hawse fitting

Two pad eyes in locker

Finish: Painted with gray gel coat

Laundry Area

Washer and dryer: Bosch washing machine # WAS24460UC and 240 volt AC Bosch dryer # WTV76100UC located at base of steps to guest cabins

Slide out shelf between the stacked washer and dryer to fold clothes