Welcome to Nordhavn.com - Power Thats Oceans Apart
   
 
side_menu



Exterior Deck Hardware

Non-Skid - All horizontal surfaces on deck to have a diamond pattern non-skid as shown in deck plan - standard non-skid to be a contrasting color to parameter deck


Stainless 316 handrails 2" (5.08 cm) O.D. with electro polished bases. All rails shown on PAE drawings to be standard in addition to those specified

Handrails at transom

Hand rail around aft deck seating area 2" (5.08 cm) diameter

Handrail on underside of aft deck overhang 1-1/2" (3.8 cm) O.D.

Hand rail at port and starboard side boarding doors


Eleven (11) S/S 316 Hawse fittings with rollers by Aritex Model no. D08Z: Five (5) P&S per drawing 7" x 16" (17.8 cm x 40.6 cm) with rollers. Four (4) at port and starboard side deck bulwarks to be recessed and to have cleat option. One (1) on aft center line with cleat


Bollards - S/S 316 16" (40.6 cm) bollards x two (2) total per drawing


Upper rub rail cap to be 316 stainless steel 2-1/2" W x 3/8" thick (6.4 cm x 9.5 mm) fastened with flush 316 stainless steel fasteners. Stainless steel caps on upper and lower rub rails as shown in design


Lower rub rail cap to be 316 stainless steel 2" W x 1/4" thick (5.08 cm x 6.35 mm)


Manship ports in hull and deck as shown on design. Ports positioned as follows:

Six (6) starboard side hull 8" x 18" (20.3 cm x 45.7 cm) oval opening

Six (6) port side hull 8" x 18" (20.3 cm x 45.7 cm) oval opening

All opening ports to be fitted with screens and deadlights


Stainless steel 316 double bow roller - 1/2" (1.27 cm) chain. Roller to be built per PAE design

 

Rails and Stanchions - Stainless steel 2" (5.08 cm) diameter 316 rails and stanchions on upper deck and flybridge deck . Rails to have welded on bases with fasteners - 1 - 1/2" (3.8cm) divider rails as shown on drawing


Foredeck rail - foredeck to have 2" (5.08 cm) diameter 316 stainless rail with 2" (5.08 cm) diameter stanchions. Welded to bases with fasteners with 1-1/2" (3.8cm) divider rails as shown on drawing


Windshield Wipers: "Exalto" 2-speed self-parking motor, with wash system for four (4) front windows

#EX2167.32 wiper motor 223BS 24 volt/23Nm, for 1-3/8” (9.5 mm) bulkheads x four (4)

#EX2135 T1 pantograph arm 17.7"- 23.6" (45 cm - 60 cm) adjustable x four (4)

#EX2174 curved wiper blade 17.7" (45 cm) x four (4)

#EX2159 combo switch for single wiper 24 volt x four (4) (custom engraved panel per PAE design)

#EX2143 24 volt solenoid valve for wash system x one (1)

#EX2136.03 tubing retainer strip x four (4)

#EX2184 washing jet for type 1 adjustable pantograph arm x four (4)

#EX2186 plastic bulkhead connector for 19.7" (50 cm) (new style)

#EX2154 tubing ¼” (6.35 mm) soft black x 16' 5" (5 m)

#EX2157 tubing ¼” (6.35 mm) hard black for push fit plumbing fittings x 16' 5" (5 m)

#EX2129 elbow .24" (6 mm) x six (6)

#EX2166 T-coupling 6x6x6mm x four (4)

#EX2119 straight coupling , ¼” (6.35 mm) x one (1)

#EX2105.025 gallery with adjustable spring to tension wiper against window x four (4)


Horn: Kahlenberg dual trumpet #D-1 with chrome finish and fog timer 120 volt compressor with 24 volt DC solenoid


Deck hatches: Per deck plan, Three (3) Lewmar #60 "Ocean Series" to include insect and privacy screens on foredeck


Windows with 5/8" (16 mm) thick tempered glass

All side windows to be tinted glass

All salon and wheel house windows are recessed 1" (2.5 cm).

All salon windows to have storm plate receptacles

Aft wheel house and wheel house head windows to be opening 3/8" (9.5 mm) tempered glass

Aft salon window to port

Forward wrap around windows on saloon deck to be fixed with 3/4" (1.9 cm) thick tempered glass


Aluminum doors by Pacific Coast Marine as follows (Note: interior as well as exterior PCM doors are included in this schedule):

Wheel house aft - one (1) each Weather Tight door with all glass panels. 21" x 73" (53.3 cm x 185.4 cm) , two (2) each Weather Tight "Dutch" doors port and starboard 21" x 73" (53.3 cm x 185.4 cm)

Salon after - one (1) each Weather Tight single opening door with all glass panels. 28" x 73" (71.1 cm x 185.4 cm)

Aft deck day head - weather tight single with window 21"x 73" (53.3 cm x 185.4 cm)

Lazarette - one (1) each with port hole, Water Tight model no. PCM4170-W with sound blanket core, painted. Right hand surface mount hinge. C.O. 21" x 56" (53.3 cm x 142.2 cm)

Hatch to engine room from aft deck (like flybridge companionway on N86)


Boarding doors: Stern door on port and starboard side on transom per drawing. Doors to have Aritex "blind" dog lock/handles

 

Nautical Structures EURO2000 LB capacity hydraulic/208 volt AC 3 phase davit with 13'-10" (396.2 cm) maximum reach, mounted on fore deck per drawing. Davit sized and positioned to launch dinghies from port and starboard side

Max single dinghy weight placed on the foredeck to be no more than 1500 lbs. (680.39 kg) max multiple dinghy or water craft weight placed on foredeck to be limited to 2000 lbs. (907.18 kg)


Upper Aft deck exterior cabinet per drawing

FRP locker and refer opening to starboard


Bottom treatment: Two (2) layers of epoxy barrier coat and two (2) coats of anti fouling paint, Pettit "Trinidad"


Fishing cockpit to drain through six (6) freeing ports with flaps

Side decks to drain through twelve (12) freeing ports


Anchor well to drain through two (2) drains 2" (5.08 cm) diameter


Stern capstan winches: Two (2) Maxwell VC 3000 24 volt DC electric port and starboard per PAE design with single foot switch each


Flag staff - 60" (152.4 cm) teak flag staff with 2" (5.08 cm) socket for aft deck rail


Anchor: One (1) x Aritex 300 lb. (136.08 kg) stainless steel plow x one (1) x 200 lb (90 kg) Stainless Steel plow


Chain - 650' (198.12 m) 5/8" HT (16 mm) chain in two (2) 400' stbd (121.92 m) and 250' port (76.2 m) lengths


Swim ladder: Stainless steel mounted in swim step, accessible from water


Cleats - Two (2) fold up style 10" (25.4 cm) cleats above swim step port and starboard for dinghy tie up


Windlass: Dual matched set of Maxwell VWC 4500 hydraulic, two (2) station controls in W/H, and aft deck and foot switches with chain counters and band brake and 5/8" HT (16 mm) chain gypsy x two (2)


Aritex chain stopper with devils claw chain tensioner for 5/8"HT (16 mm) diameter chain for starboard side anchor - port side to have chain stopper


All exterior locker doors to use flush SS pull rings for latches same as N86


All exterior locker doors to have louvered vents


All exterior door keepers to have hold open keepers


Six (6) Fishing pole holders flushed into bulwarks in cockpit. Two (2) each port and starboard sides with drains and two across transom


Stainless steel stem plate at waterline


Life raft areas port and starboard side of pilothousse deck


Swim step rails - Three (3) 2-1/2" (6.4 cm) diameter "U" shaped rails across swim step


Gasoline storage tank - 50 gallon (189.27 liter) gasoline storage tank with electric pump installed inside Portuguese bridge, accessed from foredeck deck. With 15' (4.5m) fuel hose


Six foot (1.8m) Marquipt Sea ladder with brackets at port and starboard side of bow for access to dinghy after launching


Three (3) aft deck hatches. Port and starboard are kill boxes and center is access to lazarette


Life rings - 30" (76.2 cm) diameter Life ring port and starboard


Aft deck seating upper cockpit port and starboard with teak tables


Deep Freezer: 35 cu. ft. (10.7 sq m)on port side of lazarette Cruisair cold plate refrigeration system 208 volt AC 3-phase 50/60 Hz


Kill Boxes port and starboard aft deck with hinged lids. Boxes are to be FRP with polished gelcoat finish. Draining with Shurflo #3200-011 24 volt Macerator pump


Install flush plate in deck for removable fighting chair


Live bait tanks port and starboard aft cockpit. Glass window on aft side with Imtra 24 volt Livewell light and 24 volt "Pro Bait Master" pump by Shurflo with alarm system and "Kodiac #KW1 plumbing kit


Tackle lockers/drawers port and starboard on inboard sides of bait tanks


Inside of aft deck bulwark to be smooth FRP or padded. Owners choice


Isotherm outdoor refer upper aft deck Model #Cruise 42


Stainless steel ladder from aft deck to wheel house deck port side


Out riggers x two (2) port and starboard from Rupp


Rocket launcher style rod holder for up to twelve (12) rods stainless steel


Dive bottle storage for up to four (4) dive tanks in lazerette


Door from Portuguese bridge to foredeck on center line to use Aritex Pantograph style hinge and Aritex dog set


Freeman watertight deck hatch over chain locker, #18HAALR x two (2)


Flybridge and stack: per PAE drawing

Single control consol to starboard. Consol to have engine control and gauges, single jog lever in lieu of wheel for rudder control, spot light controls, stabilizer and thruster controls

Single Stidd chair, slimline, low back, high pedestal, white vinyl, white base helm chair

Bench seat as per FB drawing with cushions

Venturi

Ladder from pilothouse aft deck

Painted on non-skid - color to match lower deck non-skid

Drinks refrigerator in foreward lockers - Cruise 85


*Specifications subject to change without notice and at the discretion of designers and builders.
**Dimensions are subject to change with Buyer’s selected options and personal effects which may add to displacement and increase both draft and waterline length

Last updated: 7/20/09

 

 



Nordhavn Fleet

40

43

52

56MS

60

62

63

64

68

72

75EYF

76

78

86

120