General: Per PAE drawing with standard N86 style joiner work |
Cushions throughout boat per drawing with buyer's choice of Ultraleather or fabric of equal value to Ultraleather |
Interior steps to all teak. Corner of steps to have non-skid varnish |
Interior lockers and drawers to be locking Timage with chrome push button |
Interior overhead panels - Majilite, "Nova Suede" #T3D4 Champagne . Removable, held in place by Velcro |
Interior door lock sets to be Mobella "Mc Coy" chrome finish |
Interior cabin doors to be 1-1/4" (3.2 cm) thick and have rubber gaskets for sound reduction and door hooks |
Hanging lockers to have automatic interior lights controlled by micro switch. Lined with Japanese cedar |
Solid (non louvered) cored doors for heads and staterooms 1-1/4" (3.2 cm) thick with rubber gaskets on door jambs |
Interior teak woodwork including cabin sole in pilot house to be varnished with 60% gloss varnish |
Salon tables, pilothouse table to be varnished with high gloss varnish |
All hand rails to be teak. |
Structural bulkheads dividing staterooms and heads to have 3/4” (1.9 cm) furring strips on each side to allow application of 3/4” (1.9 cm) thick sound insulation. The finished bulkhead material of 3/8” (9.5 mm) thickness to be applied over this |
Mirrors are located thru out vessel as shown on interior drawings |
All drawers to have sliders |
|
Galley |
Sub Zero #736TCIL refrigerator/freezer with teak panels . Left hand hinge |
Counter top: Granite w/ bull nosed edges |
Flooring: Ceramic tile or stone |
Cabinet paneling: All teak |
G.E. Profile Stainless steel drop in electric range #JD968SFSS with custom stainless steel sea rails and pot holders |
Locker and drawer interior finish: Formica |
GE "Advantium" #SCA1001DSS microwave oven with exhaust blower |
GE Profile #GCG1540FSS 15" (38.1 cm) stainless steel trash compactor |
Dishwasher 24" (61 cm) Bosch #SHV6803 stainless steel |
Garbage disposal Insinkerator 3/4 hp #444SS |
Stove alcove to be lined with fire retardant material |
|
Main Salon |
Floors: Carpet with 2 lb./sq.ft 1/2" (1.27 cm) thick Soundown underlayment pad |
Cabinet/paneling: Varnished teak |
Teak coffee table on port side |
Furniture made by Jeddy's Interiors: One (1) "L" shaped sofa and one (1) ottoman |
Locker interior finish: Teak |
Three (3) South Coast Marine Bar stools - stainless steel with cushion |
Aritex lift for 42" (106.7 cm) flat screen TV on starboard side of salon (TV not included) |
Teak valance/air con soffit port and starboard and aft sides of salon |
Two overhead teak hand rails |
Custom glass and teak fishing rod storage locker forward starboard. With book shelves outboard |
"U" shaped dinette on starboard side with high gloss teak table |
Mullions along port and starboard side for installation of widow treatments |
|
Day Head (accessed from aft deck) |
Floors: FRP |
Counter top: Granite with bull nosed edge |
Mirror and hand towel bar as shown on drawing |
Cabinet/joiner work: FRP |
Locker and drawer interior finish: Formica |
Toilet paper holder |
|
Master Cabin |
Floors: Carpet with 2 lb./sq. ft. 1/2" (1.27 cm) thick Soundown underlayment pad |
Cabinet/paneling: Varnished teak |
Hanging locker interior finish: Cedar wood |
Alcove for flat screen 42" (106.7 cm) TV forward centerline (TV not included) |
Vanity/desk with chair |
Lounge area with custom sofa and book shelves outboard |
Mattress: Custom king size |
Hanging lockers to be Japanese cedar lined with full length mirrors on inside of doors |
Night stands next to bunk |
Teak headboard frame |
|
Master Head |
Floors: Ceramic or stone tile to be specified with order |
Counter top: Granite with bull nosed edges |
Mirrors and towel bars: As shown on drawings |
Molded FRP shower stall with glass shower door. |
Cabinet/joiner work: All teak |
Locker and drawer interior finish: Formica |
Toilet paper holders and towel bars: Grohe |
Shower to have glass door |
|
Pilothouse - Layout per PAE drawing |
Floors: Teak - varnish |
Cabinet/joiner work: Varnished teak |
Countertops and instrument panel faces: Formica #939 black |
Teak table at settee. |
Settee with chart drawer under |
Helm seat - two (2) Stidds 500N-2X2 Low Back "Slimline". Vinyl and pedestal color are buyer's choice |
Locker interior finish: Formica |
Book shelves and chart drawers and lockers as shown on PAE drawing |
Drinks refrigerator under dash Model - Cruise 85 |
Compass - Ritchie SS 5000 5" (12.7 cm) mounted on teak block |
Top of instrument console to be wrapped in black leather or Ultraleather |
|
Pilothouse Head |
Floors: Teak - varnished |
Cabinet/joiner work: All teak |
Toilet paper holder: Grohe |
Countertops: Granite with bull nosed edges |
Locker interior finish: Formica |
Towel bars: Grohe |
FRP shower stall with aluminum and glass bi-fold door |
|
Forepeak (Chain Locker) - water tight collision bulkhead |
Shelves: Longitudinal plywood shelf with 5" (12.7 cm) fiddles provided port and starboard for storage |
Pad eye in each locker for bitter end of chain |
Finish: Painted with light gray gel coat |
Locker to be divided for dual anchors and chain |
Both lockers to be self draining thru thru-hulls at boot top |
|
Laundry/Passageway |
Floors: teak/spruce |
Cabinetry: teak |
|
Port Guest Cabin |
Floors: Carpet with 2 lb./sq. ft. 1/2" (1.27 cm) thick Soundown underlayment pad |
Cabinet/paneling: Varnished teak |
Hanging locker interior finish: Japanese cedar wood |
Dresser |
Drawers under bunk |
Mattress: Twin size x two (2) |
Night stand between bunks |
Teak headboard frames |
Lockers and book shelf over head of bunks |
Pipe berth outboard |
Forced air ventilation system with adjustable blower per PAE design |
|
Starboard Guest Cabin |
Floors: Carpet with 2 lb./sq. ft. 1/2" (1.27) thick Soundown underlayment pad |
Cabinet/paneling: Varnished teak |
Teak headboard frame |
Hanging locker with Japanese cedar wood lining x two (2) |
Drawers under berths |
Mattresses: Queen size 5" (12.7 cm) thick foam |
Forced air ventilation system with adjustable blower per PAE design |
Pipe berth outboard |
|
Port and Starboard Guest Heads |
Floors: Tile or stone |
Cabinetry: Varnished teak |
Shower to be molded FRP |
Countertops: Granite with bull nosed edges |
Aluminum/glass bi-fold shower door |
Towel bars |
Toilet paper holder |
Full height mirror over sink |