Welcome to Nordhavn.com - Power Thats Oceans Apart
   
 
side_menu



Exterior Deck Hardware

Non Skid - All horizontal surfaces on deck to have a diamond pattern non skid as shown in deck plan - standard non skid to be a contrasting color to parameter deck


Stainless 316 handrails 2" (5.08 cm) O.D. with electro polished bases. All rails shown on PAE drawings to be standard in addition to those specified

Handrails at transom

Hand rail around aft deck coaming 2" (5.08 cm) diameter

Handrail on underside of aft deck overhang 1-1/2" (3.8 cm) O.D.

Hand rail at port and starboard side boarding doors

Recessed hand rails from lower deck to P/B deck


Stainless Steel 316 Hawse fittings by Aritex Model no. D08Z: Six (6) port and starboard per drawing 7" x 16" (17.8 cm x 40.6 cm) with rollers. Four (4) at port and starboard side deck bulwarks to be recessed and to have cleat option. One (1) on aft center line with cleat. (11 total)


Bollards - Stainless steel 316 Aritex Model A251 Type 500 18" (45.7 cm) bollards. (10 total)


Upper rub rail cap to be 316 stainless steel 2-3/4" W x 1/2" thick (7 cm x 1.27 cm) fastened with flush 316 stainless steel fasteners. Stainless steel caps on upper and lower rub rails as shown in design


Lower rub rail cap to be 316 stainless steel 2-1/4" W x 38" thick (5.7 cm x 9.5 mm)


Manship ports in hull and deck as shown on design. Ports positioned as follows:

Six (6) starboard side hull 8" x 18" (20.3 cm x 45.7 cm) oval opening

Six (6) port side hull 8" x 18" (20.3 cm x 45.7 cm) oval opening

All opening ports to be fitted with screens and deadlights

Fixed window in day head. 34" x 17" (86.4 cm x 43.2 cm)

Two (2) Fixed windows in galley 34" x 17" (86.4 cm x 43.2 cm)


Stainless steel 316 double bow roller - Maxwell style square rollers for 5/8" (16 mm) stud link chain. Roller to be built per PAE design

 

Stainless steel 2" (5.08 cm) diameter 316 rails and stanchions on upper deck and F/B deck . Rails to have welded on round bases with fastening studs on bottom and dual 1-1/2" (3.8 cm) divider rails as shown on drawing


Foredeck to have 2" (5.08 cm) diameter 316 stainless rail with 2" (5.08 cm) diameter stanchions. Welded to round bases with fastening stud welded on bottom


Windshield Wipers: "Exalto" two (2) speed self-parking motor, with wash system for four (4) front windows

#EX2167.32 wiper motor 223BS 24 volt/23Nm, for one (1) 3/8” (9.5 mm) bulkheads x four (4)

#EX2135 T1 Pantograph arm 17.7" - 23.6" (45-60 cm) adjustable x four (4)

#EX2174 curved wiper blade 17.7" (45 cm) x four (4)

#EX2159 Combo switch for single wiper 24 volt x four (4) (custom engraved panel per PAE design)

#EX2143 24 volt solenoid valve for wash system x one (1)

#EX2136.03 tubing retainer strip x four (4)

#EX2184 Washing Jet for type 1 adjustable pantograph arm x four (4)

#EX2186 plastic bulkhead connector for 19.7" (50 cm) (new style)

#EX2154 Tubing 1/4” (6.35 mm) soft black x 16' (5 m)

#EX2157 Tubing 1/4” (6.35 mm) hard black for push fit plumbing fittings x 16' (5 m)

#EX2129 elbow 1/4" (6.35 mm) x six (6)

#EX2166 T-coupling 6x6x6 mm x four (4)

#EX2119 straight coupling , 1/4” (6.35mm) x one (1)

#EX2105.025 Gallery with adjustable spring to tension wiper against window x four (4)


Horn: Kahlenberg dual trumpet #D-1 with chrome finish and fog timer 120 volt compressor with 24 volt DC solenoid


Deck hatches: Per deck plan, Five (5) Lewmar #70 "Ocean Series" to include insect and privacy screens. One (1) Lewmar #60 "Ocean Series" to include insect and privacy screens. All on foredeck

Install one (1) Lewmar #70 "Ocean Series" on the port side of the lower platform to access the flybridge hardtop


Access to F/B from Sky Lounge stairway and PCM F/B hatch same as N72


Windows PCM with 1/2" (1.27 cm) thick tempered glass

All side windows to be tinted glass

Sky lounge to have three (3) opening windows. Two (2) stbd and one (1) port

All salon and wheel house windows are recessed 1" (2.5 cm)

All salon windows to have storm plate receptacles

Captains cabin to have one (1) opening window

Aft salon window to be opening

Forward facing pilot house windows to be 5/8" (16 mm) thick tempered glass and non-tinted


Aluminum doors by Pacific Coast Marine as follows (Note: interior as well as exterior PCM doors are included in this schedule):

Wheel house - Two (2) each, Weather Tight Dutch door, one L.H. Mortise hinge, one R.H. Mortise hinge. C.O. 21" x 73" (53.3 cm x 185.4 cm)

Salon after - One (1) each, Weather Tight sliding door with glass panels. 48" x 73" (121.9 cm x 185.4 cm)

Salon port and starboard side - Two (2) each, Weather Tight Dutch door, one RH Mortise hinge and one LH. C.O. 21" x 73" (53.3 cm x 185.4 cm)

Engine room - One (1) each, Water Tight model no. PCM4170-W with sound blanket core, painted. R.H. surface mount hinge. C.O. 21" x 73" (53.3 x 185.4 cm)

Lazarette - One (1) each, with port hole, Water Tight model no. PCM4170-W with sound blanket core, painted. R.H. surface mount hinge. C.O. 21" x 70" (53.3 cm x 177.8 cm)

Sky Lounge - One (1) each, Weather tight double opening with al glass panels. 48" x 73" (121.9 cm x 185.4 cm)

Door to fwd. Lower stateroom: Water tight model no. PCM4170-W C.O. 21" x 73" (53.3 x 185.4 cm)

Chain Locker: Water tight FRP hatch

F/B hatch


Boarding doors: port and starboard - opening in two pieces. Top to fold up and over and bottom to open outboard. Stern doors on port and starboard side aft per drawing. Doors to have Aritex "blind" dog lock/handles


Davit: Marquipt 3500 lb (1588 kg) capacity hydraulic/240 volt AC davit with extendable boom to 20' (50.8 cm) mounted on fore deck per drawing. Davit sized and positioned to launch dinghies from port and starboard side


Aft deck exterior cabinet per drawing

Sink: S.S. local made

Faucet: Scandvik model #MR2500-10810 folding type.

Gagganau BBQ


Bottom treatment: Five (5) layers of epoxy barrier coat and three (3) coats of anti fouling paint


P/B deck and F/B deck to drain through eight (8) 2" (5.08 cm) deck drains - four (4) per side . P/B deck to have sixteen (16) freeing ports - (8 per side)

Lower side decks to drain through eighteen (18) freeing ports with flaps - (9 per side)


Anchor well to drain through three (3) scuppers 2" (5.08 cm) diameter


P&S storage lockers in Portuguese bridge with stainless louvers


Two (2) FRP ventilation stack/radar mast with flag halyards port and starboard per PAE design


Portuguese bridge control stations port and starboard side of forward P/B as on N72APH with engine controls, bow and stern thruster controls, start/stop/horn


Aft deck control station for engine control ABT bow and stern thruster jog levers, start/stop, air horn push buttons and forward windlass control. Located on starboard side of transom facing aft as on N76 APH


Flybridge per PAE design with FRP hardtop, sink, drinks U-line drinks reefer, and three (3) Stidds "Slimline" helm chairs #500n-2x2 white vinyl and settee with vinyl cushions and high gloss teak table. Jacuzzi brand Three person spa. Sink to drain directly overboard. Ritchie SS 5000 compass installed. Three (3) stainless steel bar stools

Folding faucet to be Scandvik model #MR2500-10810 chromed brass


FRP hardtop over F/B with molded in non-skid 4" (10.2 cm) diameter Stainless steel support stanchions at fwd end P&S


Stern capstan winches: Two (2) Maxwell VC 3000 208 volt AC 3-phase electric port and starboard per PAE design


Flag Staff - 60" (152.4 cm) teak flag staff with 2" (5.08 cm) socket for aft P/B deck rail


Door to foredeck through Portuguese bridge with custom Aritex pantograph hinge and latch


Anchor: 300 lb. (136.01 kg) stainless steel plow x two (2)


Chain - 800 ft. (243.84 m) 5/8" (16 mm) Stud Link chain in two (2) 400 ft. (122 m) lengths from port and starboard chain lockers


Swim ladder: Stainless steel with teak steps mounted on swim step under FRP hatch accessible from water


Cleats - Two (2) fold up style 10" (25.4 cm) cleats on swim step port and starboard for dinghy tie up


Windlass: Dual matched set of Maxwell VWC 6000 hydraulic three (3) station controls wheelhouse, flybridge and aft deck and foot switches with chain counters and band brake and 5/8" (16 mm) Stud Link chain gypsy x two (2)


Aritex chain stopper with devils claw chain tensioner for 5/8" (16 mm) diameter Stud Link chain x two (2)


All exterior locker doors to use flush stainless steel pull rings for latches same as N72


All exterior locker doors to have stainless steel louvered vents


All exterior door keepers to be ABI #2039CH


Two (2) Fishing pole holders flushed into bulwarks in cockpit. One each port and starboard sides with drains


Stainless steel stem plate with dual anchor wash nozzles P&S and Nordhavn emblem


Life raft pads port and starboard side of F/B deck


Swim Step Rails - Three (3) 2-1/2" (6.4 cm) diameter "U" shaped rails across swim step


Recessed 24 volt backlit stainless steel Nordhavn name plates by Aritex: Two (2) port and starboard side per PAE design


Foredeck lockers, two (2) flush style port and stbd. as shown on drawings. Hinges to be Freeman Style "Large Yoke" with gas shocks


100 gallon (378.54 Liter) gasoline storage tank with electric pump installed inside Portuguese bridge and accessed from foredeck deck


Marquipt Sea Stairs: Six (6) step with swivel platform option. Stairs to stow in alcove in bulwark side. Alcove to have hinged cover. Per PAE design


Marquipt Sea ladder with brackets at port and starboard side of bow for access to dinghy after launching. Ladder to stow in foredeck box


All deck lockers and stowage boxes to be fitted with stainless steel gas shocks of the proper rating

 

*Specifications subject to change without notice and at the discretion of designers and builders.
**Dimensions are subject to change with Buyer’s selected options and personal effects which may add to displacement and increase both draft and waterline length

Last updated: 07/31/09

 

 



Nordhavn Fleet

40

43

52

56MS

60

62

63

64

68

72

75EYF

76

78

86

120