General: Per PAE drawing with N72 style joiner work |
Cushions throughout boat per PAE drawing of buyer's choice of ultra leather or fabric |
Interior steps to all teak. Corner of steps to have nonskid varnish |
Interior lockers and drawers to be locking Timage with chrome push button |
Interior overhead panels - Majilite Destiny Parchment #JHD6S. Removable, held in place by Velcro |
Interior door lock sets to be Mobella "Mc Coy" chrome brass |
Interior cabin doors to have rubber gaskets for sound reduction and door hooks |
Hanging lockers to have automatic interior lights controlled by micro switch. Lined with Cedar |
Solid (non louvered) cored doors for heads and staterooms 1.25" (3.2 cm) thick with rubber gaskets on door jambs |
Interior teak woodwork including cabin sole in pilot house to be varnished with 60% gloss varnish |
Salon tables, pilothouse table to be varnished with high gloss varnish |
All hand rails to be teak |
Structural bulkheads dividing staterooms and heads to have 3/4” (1.9 cm) furring strips on each side to allow application of 3/4” (1.9 cm) thick sound insulation. The finished bulkhead material of 3/8” (9.5 mm) thickness to be applied over this |
Mirrors are located thru out vessel as shown on interior drawings |
All drawers to have stainless steel ball bearing slides |
|
Galley |
Sub zero #700TCIR and #700TCIL refrigerator/freezer with teak panels x two (2). One right hand hinge and one left hand hinge |
Sub zero #700TF L freezer with teak panels located across from galley fwd. of day head - left hand hinge |
Counter top: Granite with bull nosed edges |
Flooring: Ceramic tile or stone |
Cabinet paneling: All teak |
G.E. Profile Stainless steel drop in electric range #JD968SFSS with custom stainless steel sea rails and pot holders |
Locker and drawer interior finish: Formica white |
GE "Advantium" #SCA1001DSS microwave oven with exhaust blower |
GE Profile #GCG1540FSS 15" (38.1 cm) stainless steel trash compactor |
Dishwasher 24" (61.cm) Bosch #SHV6803 stainless steel |
Garbage disposal Insinkerator 3/4 hp #444SS |
Stove alcove to be lined with Stainless steel |
Lift up galley partition to divide galley from dining room |
Pantry to starboard of galley |
Sliding doors to galley to have frosted glass panels |
|
Dining room |
Hutch on port side with beveled glass doors and drawers under |
Custom teak table with extension leaf and six custom teak and fabric chairs |
Door to galley/side deck to have frosted glass panel |
|
Wet bar |
Three (3) custom bar stools |
Sub-zero refer drawers #700BR lighted locker over with beveled glass doors |
Sub-zero wine chiller #424 |
Stainless steel sink with Grohe faucet #33.939.000 chrome/chrome |
Granite counter top |
Overhead locker |
Cabinet/paneling: Varnished teak |
|
Main Salon |
Floors: Carpet with 2 lb,/sq.ft 1/2" (1.27 cm) thick Soundown underlayment pad |
Cabinet/paneling: Varnished teak |
Teak table between chairs on port side |
Furniture: Two (2) movable chairs with two (2) ottomans |
Locker interior finish: Teak |
Teak wrapped stainless steel support column at fwd. End of settee |
Aritex lift for 50" (127 cm) flat screen TV on port side of salon. (TV not included) |
Prewire for surround sound speakers |
Teak valance/air con soffit P&S and aft sides of salon |
Two overhead teak hand rails |
| Two (2) Teak coffee tables starboard side with high gloss varnish |
Settee along starboard side with storage under |
Mullions along port and starboard side for installation of widow treatments |
Overhead to have perimeter recess with strip lighting |
|
Salon Day Head |
Floors: Teak |
Counter top: Granite with bull nosed edge |
Mirror and towel bar as shown on drawing |
Cabinet/joiner work: All teak |
Locker and drawer interior finish: Formica |
Toilet paper holder and Towel bar: TBD |
|
Master Cabin |
Floors: Carpet with 2 lb./sq. ft. 1/2" (1.27 cm) thick Soundown underlayment pad |
Cabinet/paneling: Varnished teak |
Hanging locker interior finish: Cedar wood |
| Alcove for flat screen 42" (106.7 cm) TV. (TV not included) |
Vanity/desk with chair |
Lounge chair |
Mattress: Standard king size |
Hanging lockers to be cedar lined with full length mirrors on inside of doors |
Book shelves and night stands next to bunk |
Teak headboard frame |
|
Master Head (His and Hers) |
Floors: Ceramic or stone tile to be specified with order |
Counter top: Granite with bull nosed edges |
Mirrors and towel bars: As shown on drawings |
Walk thru molded FRP shower stall with frameless glass doors accessed from both heads |
Cabinet/joiner work: All teak |
Locker and drawer interior finish: Formica |
Toilet paper holders and towel bars: TBD |
Bath tube to have frameless glass doors |
Acrylic bath tub: Kohler Tub enclosure to be tiled with buyers choice of tile or stone |
Mirrored locker doors in tub enclosure. |
|
Pilot House - Layout per PAE drawing |
Floors: Teak - varnish |
Cabinet/joiner work: Varnished teak |
Countertops and instrument panel faces: Formica #939 dark gray |
Hi-Low teak table at settee to slide in and out |
Settee with chart drawers under |
Helm seat - Three (3) Stidds 500N-2X2 Low Back "Slimline". Vinyl and pedestal color are buyer's choice |
Chart table with Cantalupi "Rico" chart light |
Locker interior finish: Formica |
Book shelves and chart drawers and lockers as shown on PAE drawing |
Drinks refrigerator under port side of settee - Isotherm Model #CR049NV567 |
Compass- Ritchie SS 5000 5" (12.7 cm) mounted on teak block |
Top of instrument console to be wrapped in black leather or ultra leather |
|
Pilot House Head |
Floors: Teak - varnished |
Cabinet/joiner work: All teak |
Toilet paper holder: TBD |
Countertops: Granite with bull nosed edges |
Locker interior finish: Formica |
Towel bars TBD |
FRP shower stall with aluminum and glass bi-fold door |
|
Captain's Cabin Pilot House |
Flooring: Carpet with pad |
Cabinet/joiner work: Varnished teak trim |
Locker interior finish: Formica |
Mattress: Single 5" (12.7 cm) foam |
Desk with movable chair |
Hanging locker cedar lined |
Dresser with four (4) drawers and mirror over |
Drawers under bunk |
Overhead lockers and shelves over bunk |
Mullions for window treatments on two windows |
|
Sky Lounge |
"L" shaped settee starboard side |
Teak coffee table |
Customer chairs and ottoman port side |
Teak end table |
Aritex lift system for 42" (106.7 cm) flat screen TV. (TV not included) |
Lockers and book shelves port side and stbd aft |
Mullions for window treatment for all six windows |
|
Forepeak (Chain Locker) Water tight collision bulkhead |
Shelves: Longitudinal plywood shelves with 5" (12.7 cm) fiddles provided port and starboard for storage |
| Pad eye in each locker for bitter end of chain |
Finish: Painted with gray gel coat |
Locker to be divided for dual anchors and chain |
Both lockers to be self draining thru thru-hulls at boot top |
|
Aft stairway to crew cabins and engine room |
Bulkheads to be finished: Varnished teak |
Teak hand rail |
|
Crew cabin |
Floors: Carpet with pad |
Cabinetry and joiner work: Formica with teak trim |
Mirrors as shown |
Hanging locker with Cedar wood lining |
Book shelves and lockers outboard of lower berth |
Drawers under berths |
Mattresses: Custom 5" (12.7 cm) thick foam x two (2) |
Forced air ventilation system with adjustable blower per PAE design |
|
Crew head |
Floors: Lonseal #154 Sandstone |
Cabinetry: Formica with teak trim |
Shower to be molded FRP |
Countertops: Granite with bull nosed edges |
Aluminum/glass bi-fold shower door |
Towel bars TBD |
Toilet paper holder TBD |
Full height mirror over sink |
|
Laundry/passageway |
Floors: Lonseal #154 Sandstone |
Cabinetry: Formica with teak trim |
Hanging locker under stairs lined with Formica |
|
Forward port and starboard guest cabins |
Floors: Carpet with 2 lb./sq. ft. 1/2" (1.27 cm) thick Soundown underlayment pad |
Cabinet/paneling: Varnished teak |
Hanging locker interior finish: Cedar wood |
Dresser outboard |
Drawers under bunk |
Mattress: Standard king size |
Night stands next to bunk |
Teak headboard frame |
|
Forward guest cabin |
Floors: Carpet with 2 lb./sq. ft. 1/2" (1.27 cm) thick Soundown underlayment pad |
Cabinet/paneling: Varnished teak |
Mirrors as shown |
Hanging locker with Cedar wood lining |
Drawers under berths |
Mattresses: Custom 5" (12.7 cm) thick foam x two (2) |
Forced air ventilation system with adjustable blower per PAE design |
|
Port and starboard and forward guest heads |
Floors: Tile or stone |
Cabinetry: Varnished teak |
Shower to be molded FRP |
Countertops: Granite with bull nosed edges |
Aluminum/glass bi-fold shower door |
Towel bars |
Toilet paper holder |
Full height mirror over sink |